This work aims to develop a resource-efficient solution for obstacle-avoiding tracking control of a planar snake robot in a densely cluttered environment with obstacles. Particularly, Neuro-Evolution of Augmenting Topologies (NEAT) has been employed to generate dynamic gait parameters for the serpenoid gait function, which is implemented on the joint angles of the snake robot, thus controlling the robot on a desired dynamic path. NEAT is a single neural-network based evolutionary algorithm that is known to work extremely well when the input layer is of significantly higher dimension and the output layer is of a smaller size. For the planar snake robot, the input layer consists of the joint angles, link positions, head link position as well as obstacle positions in the vicinity. However, the output layer consists of only the frequency and offset angle of the serpenoid gait that control the speed and heading of the robot, respectively. Obstacle data from a LiDAR and the robot data from various sensors, along with the location of the end goal and time, are employed to parametrize a reward function that is maximized over iterations by selective propagation of superior neural networks. The implementation and experimental results showcase that the proposed approach is computationally efficient, especially for large environments with many obstacles. The proposed framework has been verified through a physics engine simulation study on PyBullet. The approach shows superior results to existing state-of-the-art methodologies and comparable results to the very recent CBRL approach with significantly lower computational overhead. The video of the simulation can be found here: https://sites.google.com/view/neatsnakerobot

Abstract-- Robotic exploration in extreme environments--such as caves, oceans, and planetary surfaces--poses significant challenges, particularly in locomotion across diverse terrains. Conventional wheeled or legged robots often struggle in these contexts due to surface variability. This paper presents ARCSnake V2, an amphibious, screw-propelled, snake-like robot designed for teleoperated or autonomous locomotion across land, granular media, and aquatic environments. ARCSnake V2 combines the high mobility of hyper-redundant snake robots with the terrain versatility of Archimedean screw propulsion. Key contributions include a water-sealed mechanical design with serially linked screw and joint actuation, an integrated buoyancy control system, and teleoperation via a kinematically-matched handheld controller . The robot's design and control architecture enable multiple locomotion modes--screwing, wheeling, and sidewinding--with smooth transitions between them. Robotic exploration in extreme environments, such as caves, oceans and planetary surfaces, poses significant challenges for the diverse set of terrains [1].

Elongate limbless robots have the potential to locomote through tightly packed spaces for applications such as search-and-rescue and industrial inspections. The capability to effectively and robustly maneuver elongate limbless robots is crucial to realize such potential. However, there has been limited research on turning strategies for such systems. To achieve effective and robust turning performance in cluttered spaces, we take inspiration from a microscopic nematode, C. elegans, which exhibits remarkable maneuverability in rheologically complex environments partially because of its ability to perform omega turns. Despite recent efforts to analyze omega turn kinematics, it remains unknown if there exists a wave equation sufficient to prescribe an omega turn, let alone its reconstruction on robot platforms. Here, using a comparative theory-biology approach, we prescribe the omega turn as a superposition of two traveling waves. With wave equations as a guideline, we design a controller for limbless robots enabling robust and effective turning behaviors in lab and cluttered field environments. Finally, we show that such omega turn controllers can also generalize to elongate multi-legged robots, demonstrating an alternative effective body-driven turning strategy for elongate robots, with and without limbs.

Abstract-- This work demonstrates pose (position and shape) estimation for a free-floating, bioinspired multi-link robot with unactuated joints, link-mounted thrusters for control, and a single gyroscope per link, resulting in an underactuated, minimally sensed platform. Through a proof-of-concept hardware experiment and offline Kalman filter analysis, we show that the robot's pose can be reliably estimated. State estimation is performed using an unscented Kalman filter augmented with Gaussian process residual learning to compensate for nonzero-mean, non-Gaussian noise. We further show that a filter trained on a multi-gait dataset (forward, backward, left, right, and turning) performs comparably to one trained on a larger forward-gait-only dataset when both are evaluated on the same forward-gait test trajectory. These results reveal overlap in the gait input space, which can be exploited to reduce training data requirements while enhancing the filter's generalizability across multiple gaits. I. Introduction The performance of dynamical systems such as underwater robots, autonomous vehicles, and aircraft autopilots critically depends on accurate knowledge of the system state to ensure robustness against disturbances and maintain safety guarantees. At the same time, size, weight, and power constraints limit the number and type of sensors and actuators that can be incorporated into many systems, leading to systems that are both underactuated and minimally sensed.

Soft snake robots offer remarkable flexibility and adaptability in complex environments, yet their control remains challenging due to highly nonlinear dynamics. Existing model-based and bio-inspired controllers rely on simplified assumptions that limit performance. Deep reinforcement learning (DRL) has recently emerged as a promising alternative, but online training is often impractical because of costly and potentially damaging real-world interactions. Offline RL provides a safer option by leveraging pre-collected datasets, but it suffers from distribution shift, which degrades generalization to unseen scenarios. To overcome this challenge, we propose DiSA-IQL (Distribution-Shift-Aware Implicit Q-Learning), an extension of IQL that incorporates robustness modulation by penalizing unreliable state-action pairs to mitigate distribution shift. We evaluate DiSA-IQL on goal-reaching tasks across two settings: in-distribution and out-of-distribution evaluation. Simulation results show that DiSA-IQL consistently outperforms baseline models, including Behavior Cloning (BC), Conservative Q-Learning (CQL), and vanilla IQL, achieving higher success rates, smoother trajectories, and improved robustness. The codes are open-sourced to support reproducibility and to facilitate further research in offline RL for soft robot control.

Despite advances in a diversity of environments, snake robots are still far behind snakes in traversing complex 3-D terrain with large obstacles. This is due to a lack of understanding of how to control 3-D body bending to push against terrain features to generate and control propulsion. Biological studies suggested that generalist snakes use contact force sensing to adjust body bending in real time to do so. However, studying this sensory-modulated force control in snakes is challenging, due to a lack of basic knowledge of how their force sensing organs work. Here, we take a robophysics approach to make progress, starting by developing a snake robot capable of 3-D body bending with contact force sensing to enable systematic locomotion experiments and force measurements. Through two development and testing iterations, we created a 12-segment robot with 36 piezo-resistive sheet sensors distributed on all segments with compliant shells with a sampling frequency of 30 Hz. The robot measured contact forces while traversing a large obstacle using vertical bending with high repeatability, achieving the goal of providing a platform for systematic experiments. Finally, we explored model-based calibration considering the viscoelastic behavior of the piezo-resistive sensor, which will for useful for future studies.

This paper presents the development and integration of a vision-guided loco-manipulation pipeline for Northeastern University's snake robot, COBRA. The system leverages a YOLOv8-based object detection model and depth data from an onboard stereo camera to estimate the 6-DOF pose of target objects in real time. We introduce a framework for autonomous detection and control, enabling closed-loop loco-manipulation for transporting objects to specified goal locations. Additionally, we demonstrate open-loop experiments in which COBRA successfully performs real-time object detection and loco-manipulation tasks.

Modeling and controlling cable-driven snake robots is a challenging problem due to nonlinear mechanical properties such as hysteresis, variable stiffness, and unknown friction between the actuation cables and the robot body. This challenge is more significant for snake robots in ophthalmic surgery applications, such as the Improved Integrated Robotic Intraocular Snake (I$^2$RIS), given its small size and lack of embedded sensory feedback. Data-driven models take advantage of global function approximations, reducing complicated analytical models' challenge and computational costs. However, their performance might deteriorate in case of new data unseen in the training phase. Therefore, adding an adaptation mechanism might improve these models' performance during snake robots' interactions with unknown environments. In this work, we applied a model predictive path integral (MPPI) controller on a data-driven model of the I$^2$RIS based on the Gaussian mixture model (GMM) and Gaussian mixture regression (GMR). To analyze the performance of the MPPI in unseen robot-tissue interaction situations, unknown external disturbances and environmental loads are simulated and added to the GMM-GMR model. These uncertainties of the robot model are then identified online using a radial basis function (RBF) whose weights are updated using an extended Kalman filter (EKF). Simulation results demonstrated the robustness of the optimal control solutions of the MPPI algorithm and its computational superiority over a conventional model predictive control (MPC) algorithm.

Abstract-- This paper presents an optimization-based motion planning methodology for snake robots operating in constrained environments. By using a reduced-order model, the proposed approach simplifies the planning process, enabling the optimizer to autonomously generate gaits while constraining the robot's footprint within tight spaces. The method is validated through high-fidelity simulations that accurately model contact dynamics and the robot's motion. Key locomotion strategies are identified and further demonstrated through hardware experiments, including successful navigation through narrow corridors. I. INTRODUCTION Optimization-driven path planning and control strategies [1]-[6] have become pivotal methodologies for managing diverse, contact-intensive systems in real-world experimental settings.

Snake robots enable mobility through extreme terrains and confined environments in terrestrial and space applications. However, robust perception and localization for snake robots remain an open challenge due to the proximity of the sensor payload to the ground coupled with a limited field of view. To address this issue, we propose Blind-motion with Intermittently Scheduled Scans (BLISS) which combines proprioception-only mobility with intermittent scans to be resilient against both localization failures and collision risks. BLISS is formulated as an integrated Task and Motion Planning (TAMP) problem that leads to a Chance-Constrained Hybrid Partially Observable Markov Decision Process (CC-HPOMDP), known to be computationally intractable due to the curse of history. Our novelty lies in reformulating CC-HPOMDP as a tractable, convex Mixed Integer Linear Program. This allows us to solve BLISS-TAMP significantly faster and jointly derive optimal task-motion plans. Simulations and hardware experiments on the EELS snake robot show our method achieves over an order of magnitude computational improvement compared to state-of-the-art POMDP planners and $>$ 50\% better navigation time optimality versus classical two-stage planners.